| your basket |
|
|
| view basket |
H25MM – Manually Operated (micrometer)
Product Specification
Horizontal annular head. Easy slide-in die location & simple calibration system.
· Hose Capacity: 3/16" - 1 1/4" R1AT & R2AT (2 wire), and up to 1" R9R/4SP (4 wire).
· Swaging range of machine: See chart below
· Standard Die sets supplied with machine: 1/4" - 1", 7 sets (H16 - H40),
· Die location: Easy fit - Slide in dies
· Calibration: Micrometer
· Operation: by a Twin Speed Hand Pump with integral relief valve.
· Pump rating: 700 bar (10,000 psi)
· Additional die sets available: for 1 piece fittings, freon, PTFE and other special applications
· Option: Air/Hydraulic foot pump to replace hand pump. 5.5 - 7 bar input (80-100 psi)
· Packed Dimensions: 790 x 600 x 900mm
· Net Weight: 53kgs
· Gross Weight: 79kgs
H25MM DIE CHART
|
Die No. |
Range mm) |
Length |
Ferrule Dia max. |
|
*H06 |
6.0 - 7.9 |
40.00 |
18.00 |
|
*H08 |
8.0 - 9.9 |
40.00 |
20.00 |
|
*H10 |
10.0 - 12.9 |
40.00 |
22.00 |
|
*H13 |
13.0 - 15.9 |
40.00 |
25.00 |
|
H16 |
16.0 - 18.9 |
40.00 |
28.00 |
|
H19 |
19.0 - 21.9 |
40.00 |
31.00 |
|
H22 |
22.0 - 25.9 |
50.00 |
34.00 |
|
H26 |
26.0 - 29.9 |
50.00 |
38.00 |
|
H30 |
30.0 - 33.9 |
50.00 |
42.00 |
|
H34 |
34.0 - 39.9 |
60.00 |
46.00 |
|
H40 |
40.0 - 45.9 |
60.00 |
52.00 |
|
*H46 |
46.0 - 51.9 |
70.00 |
58.00 |
|
*H52 |
52.0 - 57.9 |
70.00 |
64.00 |
|
Maximum opening Diameter 100mm | |||
|
*These dies are not supplied as standard | |||
