| your basket |
|
|
| view basket |
H25 Mini – Manually Operated (micrometer)
Product Specification
Horizontal annular head. Easy slide-in die location & simple calibration system. C/W Die Holder drawer
· Hose Capacity: 3/16" - 1" R1AT & R2AT (2 wire), and up to 1" R9R/4SP (4 wire).
· Swaging range of machine: See chart below
· Standard Die sets supplied with machine: 1/4" - 1", 5 sets (A16 - A40),
· Die location: Easy fit - Slide in dies
· Calibration: Micrometer
· Operation: by a Twin Speed Hand Pump with integral relief valve.
· Pump rating: 600 bar (9,000 psi)
· Additional die sets available: for 1 piece fittings, freon, PTFE and other special applications
· Option: Air/Hydraulic foot pump to replace hand pump. 5.5 - 7 bar input (80-100 psi)
· Crimping force: 1000kN
· Double Elbows: (90 deg) fittings - up to & including 1" - possible (with removal of one die segment)
· Packed Dimensions: 600 x 400 x 500mm
· Net Weight: 64kgs
· Gross Weight: 39kgs
H25 Mini DIE CHART
|
Die No. |
Range mm) |
Length |
Ferrule Dia max. |
|
*A06 |
6.0 - 7.9 |
40.00 |
18.00 |
|
*A08 |
8.0 - 9.9 |
40.00 |
20.00 |
|
*A10 |
10.0 - 12.9 |
40.00 |
22.00 |
|
*A13 |
13.0 - 15.9 |
40.00 |
25.00 |
|
A16 |
16.0 - 21.9 |
40.00 |
28.00 |
|
A22 |
22.0 - 27.9 |
50.00 |
34.00 |
A28 |
28.0 - 33.9 |
50.00 |
40.00 |
|
A34 |
34.0 - 39.9 |
60.00 |
46.00 |
A40 |
40.0 - 45.9 |
60.00 |
52.00 |
|
Maximum opening w/out die 80mm +24.6mm w/die | |||
|
*These dies are not supplied as standard | |||
